Made In The U.S.A

PolarisUSA Radio takes pride in offering you the best quality programming cables and adapters available. All of our cables are manufactured and assembled in the USA out of high quality Circuit Boards and Cables. You will find that when you purchase a PolarisUSA Program adapter or cable you will very likely never need to replace it.

Please note: This cable requires the use of a Programming Adapter (PA-1, PA-2, or PA-4) in order to function. This cable CANNOT be connected directly to your computer without use of a Programming Adapter. We will not issue refunds to customers who have broken the seal on the box. NO EXCEPTIONS.

STEP-1 First, locate your Motorola radio. Make sure the power is turned off.	STEP-2 Notice the contact pins located near the top of the radio.
STEP-3 On the cable, locate the thumb screw, metal arm brace and the contact pins.	STEP-4 Use the arm bar brace on the cable to adjust the contact pins so that they align with the contacts of the radio.
STEP-5 Tighten the thumb screw on the cable so that the cable is securely fastened to the radio.	STEP-6 Do not over tighten the thumb screw. It should be tightened just enough to hold the cable onto the radio.
STEP-7 Finally, plug the female DB25 connector on the radio cable into the male DB25 connector on the programming adaptor.